Dell PowerEdge M610 Command Reference Guide

Dell Converged Enhanced Ethernet Command Reference 113
53-1002115-01
protocol lldp
6
protocol lldp
Enters the Link Layer Discovery Protocol (LLDP) configuration mode.
Synopsis protocol lldp
no protocol lldp
Operands none
Defaults The LLDP and DCBX protocols are enabled.
Command
Modes
Global configuration mode
Description Use this command to enter LLDP configuration mode to be able to make changes to the
parameters. Use the no protocol lldp command to return to the default setting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To clear all LLDP configurations:
switch(config)#no protocol lldp
See Also none

Dell PowerEdge M610 Specifications

General

Brand	Dell
Model	PowerEdge M610
Category	Server
Language	English