c. expansion card
d. cooling fan cables
e. memory modules
f. cooling shroud
6. Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed through the cable routing latch.
7. Close the system.
8. If applicable, install the front bezel.
9. Reconnect the system to the electrical outlet and turn the system on, including any attached
peripherals.
10. Import your new or existing iDRAC Enterprise license. For more information, see the iDRAC7 User's
Guide at dell.com/esmmanuals.
63
To Next Page
Loading...
