Dell PowerEdge R310 - 10 Bios; Overview; Supported ACPI States

Dell
Dell PowerEdge R310 Technical Guide 44
10 BIOS
10.1 Overview
The R310 BIOS is based on the Dell BIOS core, and supports the following features:
• 1S Support
• System BIOS
• System Setup
• Onboard PCI video BIOS support
• SATA enabled for CDROM and HDD
• PCI FW3.0 compliant
• PCI-to-PCI bridge 1.0 compliant
• Plug and Play BIOS 1.0a compliant
• MP 1.4
• SMBIOS 2.5
• USB 1.1 with legacy USB support
• USB 2.0 support in BIOS during pre-boot
• Dell Server Assistant 7.0 support
• System Service support
• iDRAC supported
• Error logging through ESM
• ACPI 2.0 support (S0, OS-S4, S5 states)
• I2O v1.5 ready
• Selectable Boot support based on BIOS Boot Specification v1.01
• El Torito CD-ROM Boot 1.0
• Remote BIOS Update support
• Remote Configuration Interface (RCI) support
• Console redirection via COM1
• PXE support based on Preboot Execution Environment Specification v2.1
• 2-byte ID support
• ePPID support in flash
• Memory remapping support
• DDR3 UDIMM and RDIMM memory support
• UEFI shell Support
• BMC and iDRAC6 Express support
• Intel
®
Virtualization Technology for Directed I/O
• Intel
®
I/O Acceleration Technology
• AC recovery staggering power-up
• DIMM mismatch checking
• Support for multiple power profiles
• Maximum performance
• OS Control (Demand-Based Switching(DBS))
• Active Power Controller
10.2 Supported ACPI States
• ACPI compliance: S0, S4, S5 supported
• NO S1, S2, S3 (STR) support
• S4 will be supported by OS support only