Installing System Components 139
4
Remove the two screws securing the power distribution board to the
chassis. See Figure 3-28.
5
Slide the power distribution board away from the standoffs, and then lift
the board out. See Figure 3-28.
Figure 3-28. Power Distribution Board
1 screws (2) 2 power supply connectors (2)
3 power-distribution board 4 standoffs (2)
5 fan module cable connectors (2)
4
1
2
5
3
book.book Page 139 Tuesday, March 31, 2009 5:26 PM
To Next Page
Loading...
