EasyManua.ls Logo

Dell PowerEdge R410 - Opening and Closing the System

Dell PowerEdge R410
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
82 Installing System Components
Opening and Closing the System
WARNING: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
WARNING: Whenever you need to lift the system, get others to assist you.
To avoid injury, do not attempt to lift the system by yourself.
Opening the System
1
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and peripherals.
2
Rotate the latch release lock counter clockwise to the unlocked position.
See Figure 3-3.
3
Grasp the cover on both sides while pressing your thumbs on latch release
lock and the indent, carefully slide the cover back, and lift it away from the
system. See Figure 3-3.
book.book Page 82 Tuesday, March 31, 2009 5:26 PM

Table of Contents

Other manuals for Dell PowerEdge R410

Related product manuals