142 Installing System Components
Figure 3-29. Removing and Installing the System Board
Installing the System Board
1
Unpack the new system board.
2
Remove the labels from the processor shield and affix them to the system
identification panel on the front of the system. See Figure 1-1.
3
Transfer the processors to the new system board. See "Removing a
Processor" on page 126 and "Installing a Processor" on page 129.
4
Remove the memory modules and transfer them to the same locations on
the new board. See "Removing Memory Modules" on page 125 and
"Installing Memory Modules" on page 123.
1 screws (9) 2 system board assembly
1
2
book.book Page 142 Tuesday, March 31, 2009 5:26 PM
To Next Page
Loading...
