Dell PowerEdge R630 - Chapter 3: Technical Specifications; Chassis Dimensions and Weight

30 PowerEdge R630 Technical Guide
Table 17 lists the available Select Network Adapter options and supported features for the R630.
Table 17. Supported Select Network Adapter options and features
Features
Broadcom
5720
BASE-T
(default)
Intel I350
BASE-T
QLogic
57800
DA/SFP+
QLogic
57800
BASE-T
Intel
I350/X540
BASE-T
Intel
I350/X520
2 x 1Gb BT
+ 2 x 10Gb
SFP+
QLogic
57840S
SFP+
Intel
I350/X710
2x1Gb BT
+ 2 x
10Gb
SFP+
Intel
4 x
10G
x710
SFP+
Number of
ports
4 x 1Gb
4 x 1Gb
2 x 1Gb +
2 x 10Gb
2 x 1Gb +
2 x 10Gb
2 x 1Gb +
2 x 10Gb
2 x 1Gb +
2 x 10Gb
4 x 10Gb
2 x 1Gb +
2 x 10Gb
4 x 10Gb
Link types
1000BASE-T
1000BASE-T
1GBASE-T,
10GBSFP+,
DCA/SR
1GBASE-T,
10GBBASE-T
1GBASE-T,
10GBBASE-T
1GBASE-T,
10GBSFP+,
DCA/SR
10GBASE-T,
SFP+,
DCA/SR
1GBASE-T,
10GBSFP+,
DCA/SR
10GBASE-T,
SFP+,
DCA/SR
TCP Chimnet
(TOE)
Not
supported
Not
supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
ISCSI HBA full
offload
Not
supported
Not
supported
Supported*
Supported*
Supported*
Supported*
Supported
Post RTS
Post RTS
FCoE HBA full
offload
Not
supported
Not
supported
Supported*
Supported*
Supported*
Supported*
Supported
Post RTS
Post RTS
FCoE boot
(boot from
SAN)
Not
supported
Not
supported
Supported*
Supported*
Supported*
Supported*
Supported
Post RTS
Post RTS
NetQueue/
VMQ IOV
Not
supported
Not
supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
SR-IOV
Not
supported
Not
supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
NIC
partitioning
(NPAR)
Not
supported
Not
supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
VNTag/VEB
Not
supported
Not
supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
*10GbE ports only
System management integration
With R630, the job of deploying, updating, monitoring and maintaining the Select Network Adapters
is fast and easy. System management integration features include the following:
 Pre-boot: Using the Dell Lifecycle Controller graphical user interface (GUI) to set configuration
such as bandwidth allocation or firmware revision level
 Post-boot: Agent-free out-of-band or high-speed in-band connection over LOM through the
Operating System/BMC pass-thru feature for sensory information
 Automation of firmware and driver version deployment upon component replacement
 Automatic monitoring of NIC status and notification on SNMP traps
 Local or remote re-configuration of any NIC, physical or virtual