Dell R630 server power specifications
Specification Value
BTU 1058 BTU/hr
Voltage 110 VAC (100–240 VAC auto-ranging 50/60 Hz)
Plug Type NEMA 5-15P
Circuit Breaker 15 amp
Pole 1
AMP Draw 2.8 A, 310 W (based on 110 voltage)
Note:
The above power configuration is based on the following example:
• Two E5-2620 Processors
• Two 495W power supplies
• Two 300GB HDDs
• CPU load 100%
• Eight 4 GB 1866 MT/s DIMMs
Installing the server in the rack
About this task
Note:
Although not used frequently, Avaya customers are required to have a monitor, USB keyboard,
and USB mouse available for use by installation and/or servicing technicians.
Before you begin
Get the Rack Installation Instructions that are shipped with the hardware for more information. If not
shipped with the hardware, see the Dell documentation Web site for instructions.
Procedure
1. Examine contents of shipping container (Avaya provided equipment), and ensure that the 6-
digit material code on the order matches the 6-digit material code on the shipping container.
2. Verify that the rack is installed according to the manufacturer's instructions and in
accordance with all local codes and laws. Verify that the rack is grounded in accordance with
local electrical code.
3. Remove the cabinet doors, if necessary.
4. Attach the rails to the rack
Dell R630 server power specifications
November 2015 Installing the Dell PowerEdge R630 Server 15
Comments on this document? infodev@avaya.com
To Next Page
Loading...
