Dell PowerEdge SC1425 - USB Connectors; Integrated NIC Connectors

USB Connectors
The system's USB connectors support USB-compliant peripherals such as keyboards, mice, and printers and may also support USB-compliant devices such as
diskette drives and optical drives. FigureB-5 illustrates the pin numbers for the USB connector and TableB-5 defines the pin assignments for the connector.
Figure B-5. USB Connector Pin Numbers
Table B-5. USB Connector Pin Assignments
Integrated NIC Connectors
Each of the system's integrated NICs function as a separate network expansion card while providing fast communication between servers and workstations.
FigureB-6 illustrates the pin numbers for the NIC connector and TableB-6 defines the pin assignments for the connectors.
Figure B-6. NIC Connector
Table B-6. NIC Connector Pin Assignments

Pin

Signal

I/O

Definition
1
RED
O
Red video
2
GREEN
O
Green video
3
BLUE
O
Blue video
4
NC
N/A
No connection
5–8, 10
GND
N/A
Signal ground
9
VCC
N/A
Vcc
11
NC
N/A
No connection
12
DDC data out
O
Monitor detect data
13
HSYNC
O
Horizontal synchronization
14
VSYNC
O
Vertical synchronization
15
NC
N/A
No connection
NOTICE: Do not attach a USB device or a combination of USB devices that draw a maximum current of more than 500 mA per channel or +5 V. Attaching
devices that exceed this threshold may cause the USB connectors to shut down. See the documentation that accompanied the USB devices for their
maximum current ratings.

Pin

Signal

I/O

Definition
1
Vcc
N/A
Supply voltage
2
DATA
I
Data in
3
+DATA
O
Data out
4
GND
N/A
Signal ground

Pin

Signal

I/O

Definition