58 Installing System Components
Figure 3-2. Opening and Closing the System
Closing the System
1
Align the cover with the slots on the bottom of the chassis. See Figure 3-2.
2
Press down on the cover until the cover release tab snaps into place.
3
Place the system upright on a flat, stable surface.
4
Reattach any peripherals and connect the system to an electrical outlet.
5
Turn on the system and attached peripherals.
1 release tab
Mayzie_HOM.book Page 58 Monday, August 31, 2009 9:33 PM
To Next Page
Loading...
