90 Installing System Components
Figure 3-17. Removing and Installing the Cooling Fan
Installing the Cooling Fan
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
Align the tabs on the system fan with the securing slots on the chassis.
2
Slide the system fan into the securing slots until the tabs lock into place.
3
Connect the fan cable to the system board. See Figure 6-1 for the location
of the connector.
1 release tab 2 securing tabs
3 power cable
Mayzie_HOM.book Page 90 Monday, August 31, 2009 9:33 PM
To Next Page
Loading...
