39 PowerEdge T620 Technical Guide
Table 22 lists the rack type supported by the T620 rails. The T620 does not support mounting in a
two-post rack.
Table 22. T620 supported rack rail system
For detailed information about static and sliding rails, see the Rack rail specifications section in
Appendix A. For more information on installing the T620 in a rack, see the
Rack Installation
Instructions
on Dell.com/Support/Manuals.
Cable management arm
The optional CMA organizes and secures the cords and cables exiting the back of the server and
unfolds to allow the server to extend out of the rack without having to detach the cables. Some key
features of the T620 CMA include:
Large U-shaped baskets to support dense cable loads
Open vent pattern for optimal airflow
Ability to be mounted on either side
Use of hook-and-loop straps rather than plastic tie wraps to eliminate the risk of cable damage
during cycling
Low-profile fixed tray to both support and retain the CMA in its fully closed position
Ability to mount the CMA and tray without the use of tools, due to snap-in designs
To Next Page
Loading...
