Dell PowerEdge T620 - Power Supply Specifications; Rack Rail Specifications; Table 31. Power Supply Specifications; Table 32. Rail Adjustability Range

52 PowerEdge T620 Technical Guide
Maximum shock
Operating
Half sine shock in all operational orientations of 31G +/– 5% with a pulse duration of 2.6ms
+/– 10%
Storage
Half sine shock on all six sides of 71G +/– 5% with a pulse duration of 2ms +/–10%; square
wave shock on all six sides of 27G with velocity change at 235 in/sec or greater
Altitude
Operating
–15.2m to 3048m (–50 ft to 10,000 ft)
Storage
–15.2m to 12,000m (–50 ft to 39,370 ft)
Airborne contaminant level
Class G1 or lower as defined by ISA-S71.04-1985
Power supply specifications
Table 31 lists power supply specifications for the PowerEdge T620.
Table 31. Power supply specifications
Specification
1100W DC
1100W AC
750W AC
Titanium
750W AC
Platinum
495W AC
Current
consumption
32A
12–6.5A
10–5A
10–5A
6.5–3A
Supply voltage
-48V to -60V DC
100–240VAC
1
200–240VAC
100–240VAC
1
100–240VAC
1
Frequency
N/A
50/60Hz
50/60Hz
50/60Hz
50/60Hz
Heat dissipation
(BTU/hr max)
4416
4100
2843
2891
1908
Maximum inrush
current
4
55A
55A
55A
55A
55A
1
Auto-ranging
4
Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55A per
power supply for 10ms or less.
Rack rail specifications
Table 32 lists the spacing dimensions for the T620 sliding rails.
Table 32. Rail adjustability range
System
Rail
Identifier
Rail Type
Rail Adjustability Range (mm)
Rail Depth (mm)
Square
Round
Threaded
without
CMA
with
CMA
Min
Max
Min
Max
Min
Max
T620
C2
Sliding
686
756
672
749
686
771
760
840