Dell PowerVault LTO 7 - Installing external and rack mount drives

Table 4. SCD, Ready/Activity LED, and Fault LED descriptions (continued)
Condition of
green
Ready/
Activity LED
Condition
of amber
Fault LED
Condition
of white
encryptio
n LED
Condition of
the SCD
Panel
Condition of
the SCD Dot
Meaning of LEDs and SCD Panel and
SCD Dot
Off Flashing
twice per
second
Off Off Off
The drive is updating rmware.
Off Flashing
once
every 2
seconds
Off Off Off
The drive detected an error and is
running a rmware recovery. It resets
automatically.
Rear panel
1
2
3
4
a80hh095
Figure 5. Rear panel of internal SAS tape drive
1 SAS connector 3 Library interface
2 Ethernet - not iSCSI - for
transferring rmware and
dumps only
4 LED controls for library drive sled
a80hh012
2
3
1
4
Figure 6. Rear panel of external SAS tape drive
1 Power connector 3 Mini-SAS connectors (HD connectors for LTO9)
2 Fan enclosure 4 Ethernet - not iSCSI - for transferring rmware
and dumps only
10 Dell PowerVault LTO Tape Drive: User's Guide