Technical specifications
This section describes the technical specifications of the MD2412 and the MD2424 enclosures.
Enclosure dimensions
Table 1. Enclosure dimensions
Specification MD2412 MD2424
Height 2U
86.8 mm (3.4 in.)
2U
86.8 mm (3.4 in.)
Width 444 mm (17.5 in.) 444 mm (17.5 in.)
Depth 545 mm (21.5 in.) 497 mm (19.5 in.)
Enclosure weights
Table 2. Enclosure weights
Component MD2412 MD2424
Storage enclosure (empty) 9.5 kg (21 lb) 9.2 kg (20.25 lb)
Drive with carrier (each) 0.8 kg (1.76 lbs) 0.24 kg (0.53 lbs)
EMM (each) 2.43 kg ( 5.36 lb) 2.52 kg ( 5.55 lb)
PSU (each) 0.81 kg (1.79 lb) 0.89 kg (1.96 lb)
System without drives 15.98 kg (35.23 lb) 16.0 kg (35.27 lb)
System with all drives installed 25.58 kg (56.39 lb) 21.76 kg (47.99 lb)
NOTE:
● Weights that are shown are nominal, and subject to variances.
● Weights may vary due to different canisters and power supplies; and differing calibrations between scales.
● Weights may also vary due to the number and type of disk drives (SAS or SSD) installed.
Environmental requirements
Table 3. Ambient temperature and humidity
Specification Temperature range Relative humidity Max. Temperature
Gradient
Operating 0°C to 40°C (32°F to 104°F) 8% to 85% non-condensing 20°C per hour
Operating (ASHRAE A3) 5°C to 40°C (41°F to 104°F) 5% to 85% non-condensing 30°C per hour
Non-operating -40°C to +65°C (-40°F to +149°F) 10% to 95% non-condensing -
A
Technical specifications 33
To Next Page
Loading...
