Why can't I make changes to the Dell Software storage array?
If you are unable to make changes to the storage array, it may be due to a password mismatch. After changing the password on the storage array, you must also update the password in the Plug-in to match the storage array password.
What to do if I cannot communicate with the Dell Software application server?
If you're experiencing communication issues with the application server, check the firewall settings to ensure the Jetty TCP port is enabled. If it's disabled, enable it. Also, verify that the Jetty6-Service is started on the application server; if it's stopped, start it.
How to fix error when registering Dell Software vCenter Plug-in?
If you encounter an error while registering the vCenter Plug-in, please verify the following: * The specified administrator user ID exists and has administrator privileges. * A different application server has not already been registered to the target vCenter Server (use the Manage Plug-ins option from vSphere Client). * The IP address or DNS Name is correct for the target vCenter Server and is reachable from the application server host.
What to do if Dell Software displays 'Error Loading Arrays' message?
If you see an 'Error Loading Arrays' message, it is likely due to stale cache data within Internet Explorer. Clearing the browser cache and restarting the vSphere Client should resolve this issue.
How to maximize client performance in Dell Software?
To maximize client performance, use a fast CPU client with sufficient memory to avoid page swapping. This setup provides the best environment for running the vSphere Client.
How do I suppress slow script warning messages in Dell Software?
To suppress slow script warning messages, apply the following registry change on the host the vSphere Client is being run from: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Styles, DWORD MaxScriptStatements set to 0xFFFFFFFF.
What to do if I cannot create or delete objects in Dell Software?
If you are unable to create or delete objects, verify that your user ID has the required storage administrator privileges assigned for your role.
Why doesn't the Dell Software MD vCenter Plug-in show the new storage array name after a clear configuration in MDSM?
If the MD vCenter Plug-in does not display the new storage array name after a clear configuration operation in MDSM, remove the storage array from the MD vCenter Plug-in, rename the storage array in MDSM, and then re-add the storage array to the MD vCenter Plug-in.
What happens if entering an invalid alternate controller IP address causes duplicate array entries in Dell Software?
If entering an invalid alternate controller IP address results in duplicate array entries, remove the duplicate storage arrays from Array Manager and re-add them with the correct IP addresses for each storage array.
Why is there a long timeout for SAS ESX Host Wizard Operation in Dell Software?
A long timeout for the SAS ESX Host Wizard Operation may be due to unsupported SAS HBA cards. Close and restart the vSphere Client.
Overview of the MD3060e storage enclosure and manual structure.
Describes front panel components, features, and indicators.
Identifies components on the back of the storage enclosure.
Explains indicators for cooling fans, power supplies, and management modules.
Guidelines for installing physical disks in the correct order for airflow.
Recommended tools and front bezel installation/removal procedures.
Procedures for physical-disk drawers and individual disks.
Procedures for SAS cables, enclosure management modules, and power supplies.
Procedures for removing and installing cooling fan modules.
Verifying external cable connections and troubleshooting connectivity issues.
Diagnosing and resolving issues with power supply modules and enclosure cooling.
Resolving issues related to physical disk failures and wet storage enclosures.
Details on physical disks, SAS connectors, and management modules.
Details on power supply, operating conditions, and environmental factors.
How to locate the service tag and contact Dell for support.
Instructions for providing feedback on the documentation.
Overview of the MD3060e storage enclosure and manual structure.
Describes front panel components, features, and indicators.
Identifies components on the back of the storage enclosure.
Explains indicators for cooling fans, power supplies, and management modules.
Guidelines for installing physical disks in the correct order for airflow.
Recommended tools and front bezel installation/removal procedures.
Procedures for physical-disk drawers and individual disks.
Procedures for SAS cables, enclosure management modules, and power supplies.
Procedures for removing and installing cooling fan modules.
Verifying external cable connections and troubleshooting connectivity issues.
Diagnosing and resolving issues with power supply modules and enclosure cooling.
Resolving issues related to physical disk failures and wet storage enclosures.
Details on physical disks, SAS connectors, and management modules.
Details on power supply, operating conditions, and environmental factors.
How to locate the service tag and contact Dell for support.
Instructions for providing feedback on the documentation.
General| Drive Bays | 60 |
|---|---|
| Supported Drive Types | SAS, SATA |
| Management | Dell Storage Manager |
| Host Interface | 12 Gbps SAS |
| Power Supply | Dual redundant power supplies |
| Cooling | Redundant cooling fans |
| RAID Support | Requires external RAID controller |
To Next Page