Need help?Do you have a question about the Dell PowerVault E03J Series and is the answer not in the manual?
Details the features and indicators on the front panel, bezel, and back panel of the enclosure.
Explains hard-drive indicator patterns and Enclosure Management Module (EMM) status indicators.
Covers EMM functions, failover scenarios, enclosure alarms, and thermal shutdown.
Lists and explains the various power indicator codes for the enclosure's power supply modules.
Lists prerequisites and explains how to connect the enclosure using SAS cables in different modes.
Details physical connection steps, changing operating modes, and managing the enclosure.
Guides on how to download and update firmware for the storage enclosure.
Lists required tools and describes removing/installing front bezel and drive blanks.
Details the procedures for installing and removing hard drives and their carriers.
Explains how to install and remove Enclosure Management Modules (EMMs) and blanks.
Details the procedures for installing and removing the power supply/cooling fan modules.
Covers the removal and installation of the control panel and backplane.
Covers essential safety precautions and troubleshooting enclosure startup failures.
Guides on resolving communication issues and external connection problems.
Diagnoses issues with power supply, cooling problems, and Enclosure Management Modules (EMMs).
Addresses hard drive issues, wet enclosure handling, and damaged enclosure troubleshooting.
Provides contact information and methods for reaching Dell technical support.
Details the features and indicators on the front panel, bezel, and back panel of the enclosure.
Explains hard-drive indicator patterns and Enclosure Management Module (EMM) status indicators.
Covers EMM functions, failover scenarios, enclosure alarms, and thermal shutdown.
Lists and explains the various power indicator codes for the enclosure's power supply modules.
Lists prerequisites and explains how to connect the enclosure using SAS cables in different modes.
Details physical connection steps, changing operating modes, and managing the enclosure.
Guides on how to download and update firmware for the storage enclosure.
Lists required tools and describes removing/installing front bezel and drive blanks.
Details the procedures for installing and removing hard drives and their carriers.
Explains how to install and remove Enclosure Management Modules (EMMs) and blanks.
Details the procedures for installing and removing the power supply/cooling fan modules.
Covers the removal and installation of the control panel and backplane.
Covers essential safety precautions and troubleshooting enclosure startup failures.
Guides on resolving communication issues and external connection problems.
Diagnoses issues with power supply, cooling problems, and Enclosure Management Modules (EMMs).
Addresses hard drive issues, wet enclosure handling, and damaged enclosure troubleshooting.
Provides contact information and methods for reaching Dell technical support.
General| Number of Bays | 12 |
|---|---|
| Product Type | Enclosure |
| Type | JBOD Enclosure |
| Drive Bays | 12 x 3.5" Drive Bays |
| Drive Interface | SAS |
| Interface | 6Gb/s SAS |
| RAID Support | No RAID |
| Cooling | Redundant Cooling |
| Compatibility | PowerEdge Servers |
| Model | PowerVault E03J Series |
To Next Page