Dell PowerVault MD3060e Installation Guide

Issue Recommended Action
Return Code -4 message is displayed for any method
that runs. A specific error message is not displayed other
than the return value, but the SMI-S Provider trace log
shows that the method failed because of an
authentication failure. Update the Property -
Secret
with the current storage array password in the
<OEM>SharedSecret instance by using Modify
Instance CIM. You can perform this operation from the
client used for communicating with SMI-S Provider (for
example, CIM Navigator).
The following message is displayed when you use the CIM
CLI application:
roundTripTime is incorrect in
ClientOpPerformanceData
You can ignore this message when using the CIM
command line interface.
11

Dell PowerVault MD3060e Specifications

General

Brand	Dell
Model	PowerVault MD3060e
Category	Enclosure
Language	English