Dell PowerVault MD3200i - Locating, Naming, and Setting Passwords

Appendix—Manual Configuration of iSCSI 69
4 To set up discovery session CHAP authentication, first uncomment the
following line:
discovery.sendtargets.auth.authmethod = CHAP
5
Set a user name and password for a discovery session CHAP authentication
of the initiator by the target(s) by editing the following lines:
discovery.sendtargets.auth.username =
<iscsi_initiator_username>
discovery.sendtargets.auth.password =
<CHAP_initiator_password>
6
To set the user name and password for discovery session CHAP
authentication of the target(s) by the initiator for Mutual CHAP, edit the
following lines:
discovery.sendtargets.auth.username =
<iscsi_target_username>
discovery.sendtargets.auth.password_in =
<CHAP_target_password>
7
The final configuration contained in the /etc/iscsi/iscsid.conf file might
look like this:
node.session.auth.authmethod = CHAP
node.session.auth.username = iqn.2005-
03.com.redhat01.78b1b8cad821
node.session.auth.password = password_1
node.session.auth.username_in= iqn.1984-
05.com.dell:powervault.123456
node.session.auth.password_in = test1234567890
discovery.sendtargets.auth.authmethod = CHAP
discovery.sendtargets.auth.username = iqn.2005-
03.com.redhat01.78b1b8cad821
discovery.sendtargets.auth.password = password_1
book.book Page 69 Sunday, September 11, 2011 10:24 PM