12 Configuring Fibre Channel
Direct-Attached Cabling Examples
Single Controller Configurations
Figure 2 through Figure 4 show two and four host servers, each connected
to one RAID controller module. The host servers share storage space
without redundant paths. If one path fails, the host server on that path is
disconnected from the storage array.
Figure 2. Two Host Servers With Dual Port HBAs Connected to a Single-Controller
(Simplex) Storage Array
PowerVault MD3600f series storage array
Corporate, public, or
private network
Server 1
Server 2
book.book Page 12 Tuesday, June 14, 2011 10:04 AM
To Next Page
Loading...
