Contents 3
Contents
Configuring Fibre Channel on Direct- and
SAN-Attached Storage Arrays
. . . . . . . . . . . . . . . 5
Other Information You May Need . . . . . . . . . . . . . 6
Installing Supported Fibre Channel HBAs
. . . . . . . . 7
Installing Fibre Channel HBA
on Your Host Server
. . . . . . . . . . . . . . . . . 7
Customizing HBA Drivers and
Firmware Settings . . . . . . . . . . . . . . . . . . 7
Using Fibre Channel Switch Zoning
. . . . . . . . . . . . 8
World Wide Name Zoning
. . . . . . . . . . . . . . 9
Switch Zoning Requirements
. . . . . . . . . . . . 10
Setting Up Zoning on the
Fibre Channel Switch Hardware . . . . . . . . . . 10
Cabling the Storage Array
. . . . . . . . . . . . . . . . 11
Redundant and Non-Redundant Cabling
. . . . . . 11
Direct-Attached Cabling
. . . . . . . . . . . . . . 11
SAN-Attached Cabling
. . . . . . . . . . . . . . . 17
book.book Page 3 Tuesday, June 14, 2011 10:04 AM
To Next Page
Loading...
