Configuring Fibre Channel 19
Remote Replication Cabling Example
Remote Replication is a storage array premium feature that provides online,
real-time replication of data between storage arrays. When this feature is
activated, a dedicated port (port 3) on each RAID controller is reserved
exclusively for Remote Replication traffic. No other data traffic is allowed on
that port until the Remote Replication feature is deactivated. A dedicated
zone on each Fibre Channel switch is also required.
Switch Fabric A Switch Fabric B
Zone_1_Server_1_HBA_0 Zone_5_Server_1_HBA_1
Server1-HBA_0 Server1-HBA_1
Array_Ctrl-0-1 Array_Ctrl-0-0
Array_Ctrl-1-0 Array_Ctrl-1-1
Zone_2_Server_2_HBA_0 Zone_6_Server_2_HBA_1
Server2-HBA_0 Server2-HBA_1
Array_Ctrl-0-3 Array_Ctrl-0-2
Array_Ctrl-1-2 Array_Ctrl-1-3
Zone_3_Server_3_HBA_0-0 Zone_7_Server_3_HBA_0_1
Server3-HBA_0_0 Server3-HBA_0_1
Array_Ctrl-0-1 Array_Ctrl-0-0
Array_Ctrl-1-0 Array_Ctrl-1-1
Zone_4_Server_3_HBA_1_0 Zone_8_Serv er_3_HBA_1_1
Server3-HBA_1_0 Server3-HBA_1_1
Array_Ctrl-0-3 Array_Ctrl-0-2
Array_Ctrl-1-2 Array_Ctrl-1-3
book.book Page 19 Tuesday, June 14, 2011 10:04 AM
To Next Page
Loading...
