Switch Fabric A Switch Fabric B
Server2_HBA_0 Server2_HBA_1
Array1_Ctrl-0-0 Array1_Ctrl-0-1
Array1_Ctrl-0-3 Array1_Ctrl-0-2
Array1_Ctrl-1-0 Array1_Ctrl-1-1
Array1_Ctrl-1-2 Array1_Ctrl-1-3
Zone3_Server3_HBA_0 Zone6_Server3_HBA_1
Server3_HBA_0 Server3_HBA_1
Array1_Ctrl-0-0 Array1_Ctrl-0-1
Array1_Ctrl-0-3 Array1_Ctrl-0-2
Array1_Ctrl-1-0 Array1_Ctrl-1-1
Array1_Ctrl-1-2 Array1_Ctrl-1-3
Remote Replication Cabling Example
Remote Replication is a storage array premium feature that provides online, real-time replication of data
between storage arrays. When this feature is activated, a dedicated port (port 3) on each RAID controller
is reserved exclusively for Remote Replication traffic. No other data traffic is allowed on that port until the
Remote Replication feature is deactivated. A dedicated zone on each Fibre Channel switch is also
required.
15
To Next Page
Loading...
Need help?
General