Dell Precision 5480 - Mil-SPEC

Mil-SPEC
T
he Precision 5480 meets military specifications for the following MIL-STD 810G tests:
Table 48. Tower - Military specifications
Test Category Test Method Test Parameters
Non-operating altitude test Method 500.6
P
rocedure I
Test specification:
● Altitude: 15,000 ft
● Temperature: 21°C
Operating altitude test Method 500.6
P
rocedure II
Test specification:
● Altitude: 15,000 ft
● Temperature: 21°C
Non-operating high temperature test Method 501.7
P
rocedure I
Test specification:
● High temperature cycles, climatic
category A1 - Hot dry
● Duration: 7 cycles, Non-Operating
Operating high temperature test Method 501.7
P
rocedure II
Test specification:
● Temperature: 60°C
● Duration: 120 hours constant
Non-operating low temperature test Method 502.7
P
rocedure I -
Storage
Test specification:
● Temperature: -51°C
● Duration: 24 hours
Operating low temperature test Method 502.7
P
rocedure II -
Operation
Test specification:
● Temperature: -29°C
● Duration: 24 hours
Humidity test Method 507.6
P
rocedure I
Induced B3
● Duration: Hot-humid, 15 days exposure
Induced B3, Non-operating
Shock material to be packaged Method 516.8
P
rocedure II
Test specification:
● On-road shock - 5.1 g/11 m
● Off-road shock - 15.2 g/5 m
Mechanical shock test - I
B
ench handling
Method 516.8
Procedure VI
Test specification:
● Rise test units at one edge 100 mm (4-
inch) or an angle of 45°about a solid
wooden bench top.
Sand and dust
B
lowing dust
Method 510.7
Procedure I
Test specification:
● Relative humidity: 30%
● Dust concentration: (10.6±7) g/m³
● Air flow velocity: 1.5 m/s to 8.9 m/s
Engineering specifications 37