Dell Precision 5520 - Memory Modules

Memory modules
Removing the Memory Module(s)
Steps
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. Base cover
b. battery
3. Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its
connector on the system board [2].
Installing the Memory Module(s)
Steps
1. Insert the memory module into the memory socket.
2. Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and re-install it.
3. Install the:
a. battery
b. base cover
4. Follow the procedures in After Working Inside Your Computer.
System fan
Removing the Fans
Steps
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
Disassembly and reassembly
23