Table 5. Advanced (continued)
Option Description
Multi Core Support Specifies whether the processor will have one or more cores enabled. All (Default Setting)
Intel TurboBoost Enables or disables the Intel TurboBoost mode of the processor. Enabled (Default Setting)
C-States Control This option enables or disables additional processor sleep states. Enabled (Default Setting)
Audio Enables or disables the integrated audio controller. Enabled (Default Setting)
Keyboard Illumination This field lets you choose the operating mode of the keyboard illumination feature. Disabled
(Default Setting)
USB Configuration
Allows you to configure the integrated USB controller.
Default Enabled: Enable Boot Support, Enable Thunderbolt Ports; Always Allow Dell Docks;
Enable External USB Port
Touchscreen This field controls whether the touchscreen is enabled or disabled. Enabled (Default
Setting)
AC Behavior Allows the system (if OFF or in Hibernate) to power-on automatically when AC is inserted.
Wake On LAN Allows the computer to power up from the off state when triggered by special LAN.
Disabled (Default Setting)
Advanced Battery Charge
Configuration
Maximizes battery health while still supporting heavy use during the work day. Disabled
(Default Setting)
Block Sleep Lets you to block entering to sleep (S3 state) in OS environment. Disabled (Default
Setting)
Auto On Time Sets the time of day when you would like the system to turn on automatically. Disabled
(Default Setting)
Peak Shift Minimizes AC power usage at times of peak demand. Disabled (Default Setting)
USB Wake Support Allows you to enable USB devices to wake the system from Standby. Enabled (Default
Setting)
LCD Brightness This options sets the panel brightness independently for Battery and AC power.
USB Emulation Allows you to enable or disable the USB Emulation feature.
Enabled (Default Setting)
USB PowerShare Allows you to enable or disable the USB PowerShare feature.
Enabled (Default Setting)
USB Wake Support This option allows you to enable USB devices to wake the system from Standby.
Disable(Default Setting)
SATA Operation Displays the SATA Operation information.
Adapter Warnings Allows you to enable or disable the adapter warnings feature.
Multimedia Key Behaviour
Function Key (Default Setting)
Battery Health Displays the battery health information.
Battery Charge
Configuration
Adaptive (Default Setting)
Miscellaneous Devices Allows you enable or disable the various on board devices. The options are:
● External USB Ports - Enabled (Default Setting)
● USB Debug - Disabled (Default Setting)
System Setup 37
To Next Page
Loading...
