Table 16. System setup options—Maintenance menu(continued)
Maintenance
Default: OFF
Start Data Wipe
CAUTION: This Secure Wipe Operation deletes information in a way that
it cannot be reconstructed.
If enabled, the BIOS will queue up a data wipe cycle for storage devices that are
connected to the motherboard on the next reboot.
Default: OFF
Allow BIOS Downgrade Controls flashing of the system firmware to previous revisions.
Default: ON
Table 17. System setup options—System Logs menu
System Logs
Power Event Log
Clear POWER Event Log Select keep or clear Power events.
Default: Keep
BIOS Event Log
Clear Bios Event Log Select keep or clear BIOS events.
Default: Keep
Thermal Event Log
Clear Thermal Event Log Select keep or clear Thermal events.
Default: Keep
Table 18. System setup options—SupportAssist menu
SupportAssist
Dell Auto OS Recovery Threshold Controls the automatic boot flow for SupportAssist System Resolution Console and
for Dell operating system Recovery tool.
Default: 2.
SupportAssist OS Recovery Enables or disables the boot flow for SupportAssist operating system Recovery tool
in the even of certain system errors.
Default: ON
BIOSConnect Enables or disables cloud Service OS recover if the main operating system fails to
boot with the number of failures equal to or greater than the value specified by the
Auto OS Recovery Threshold setup option.
Default: ON
Clearing CMOS settings
About this task
CAUTION: Clearing CMOS settings will reset the BIOS settings on your computer.
Steps
1. Turn off your computer.
System setup
57
To Next Page
Loading...
