EasyManuals Logo

Dell Precision 7680 Connection Guide

Dell Precision 7680
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Before you begin
You can connect up to two 4K external displays or one 8K and above display using the two Thunderbolt 4 on your Precision
7680.
Total number of displays supported:
Two 4K external displays: 2 ports (Thunderbolt 4)
One 8K
Before you begin, ensure that you:
Check the graphics options on your computer
Check the ports available on your external displays and decide the Mode of connection.
Check the graphics options on your computer
The number of external displays that are supported depends on the type of graphics card available on your computer:
The integrated graphics card can support a maximum of 4 displays.
The discrete graphics card can support a maximum of 4 displays.
NOTE:
Dell Docking StationWD19DCS display behavior follows the host the Thunderbolt 4 (USB Type-C) port.
The HDMI 2.1 port and MFDC (MFDP) Type-C port on the WD19DCS docking station cannot support dual monitors
simultaneously.
For more information about the graphics card available on your computer, run Dell SupportAssist on your computer, or scan your
hardware at www.dell.com/support.
The following are the graphic options that may be installed in your computer:
Intel UHD Graphics (Integrated graphics)
NVIDIA RTX A1000 6 GB laptop GPU (Discrete graphics)
NVIDIA RTX 2000 Ada generation laptop GPU (Discrete graphics)
NVIDIA RTX 3500 Ada generation laptop GPU (Discrete graphics)
NVIDIA RTX 4000 Ada generation laptop GPU (Discrete graphics)
NVIDIA RTX 5000 Ada generation laptop GPU (Discrete graphics)
NVIDIA GeForce RTX 4090 laptop GPU (Discrete graphics)
External display connection mode
External display connection mode that is selected in the BIOS defines the number of displays that are supported by the
computer.
External display connection modes are:
Hybrid Graphics mode
Hybrid Graphics mode with Direct Output
Discrete Graphics mode
Hybrid Graphics mode
To enable Hybrid Graphics mode in the computer's BIOS:
1. Restart the system and immediately press <F2> to enter the BIOS.
2. On the BIOS screen, select Video.
1
4 Before you begin

Other manuals for Dell Precision 7680

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell Precision 7680 and is the answer not in the manual?

Dell Precision 7680 Specifications

General IconGeneral
StorageUp to 8TB PCIe NVMe SSD
Processor Options13th Gen Intel Core i5/i7/i9 or Intel Xeon
Display16-inch, FHD+ (1920 x 1200) to UHD+ (3840 x 2400)
GraphicsIntel UHD Graphics to NVIDIA RTX 5000 Ada Generation (16GB GDDR6)
MemoryUp to 128GB DDR5
Operating SystemWindows 11 Pro
PortsHDMI 2.1, SD card reader
WirelessWi-Fi 6E, Bluetooth 5.2
CameraFHD IR camera with privacy shutter
Battery97Whr

Related product manuals