Drives
Diskette Drive Determines how the BIOS configures floppy drives.
• Disabled
• Enabled (default)
SATA Operation Configures the operating mode of the integrated hard-drive controller.
• RAID Autodetect / AHCI
• RAID Autodetect / ATA
• RAID On (default)
Drives These fields let you enable or disable various drives in the computer:
• SAS-0
• SAS-1
• SAS-2
• SAS-3
• SAS-4
• SAS-5
• SAS-6
System Configuration
Integrated NICs Enables or disables the integrated network card. You can set the integrated NIC to:
• Disable
• Enable (default)
• Enabled with PXE
USB Controller Enables or disables the integrated USB controller.
• Disable
• Enable (Default)
• No Boot
Serial Port #1 Determines how the built-in serial port operates.
• Disable
• Auto (default)
• COM1
• COM3
Miscellaneous Devices Enables or disables various system devices.
• Front USB
• Rear USB
• Audio
117
To Next Page
Loading...
