38
Installing the Power-Distribution Unit
1. Place the power-distribution unit on the computer.
2. Install the screws that secure the power distribution unit.
3. Route all the power cables through their routing channels.
4. Connect the CPU 1, CPU 2, SAS Backplane and optical driver power connectors.
5. Slide the front chassis assembly to its original position.
6. Install:
– expansion card cages
– fan bracket
– system fans
– hard-drive assembly
– cooling shroud
– cover
– front bezel
7. Follow the procedures in
After Working Inside Your Computer
.
85
To Next Page
Loading...
