Dell Precision T5610 - Installing the Thermal Sensor

3. Identify the thermal sensor connected to the system board.
4. Disconnect the thermal sensor from the system board.
5. Release the latch that secures the thermal sensor. In this instance, the thermal sensor is connected to the hard
drive.
Installing the Thermal Sensor
NOTE: The thermal sensor is an optional component and your computer may not ship with it.
1. Connect the thermal sensor to the component that you wish to monitor the temperature, and secure it with the
latch.
2. Connect the thermal sensor cable to the system board.
3. Install the cover.
4. Follow the procedures in After Working Inside Your Computer .
19