Removing the Processor
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a. cover
b. air tunnel (if available)
c. heatsink
3. To remove the processor:
NOTE: The processor cover is secured by two levers. They have icons that indicate which lever needs to be
opened first and which lever closes first.
a. Press down on the first lever holding the processor cover in place and release it sideways from its retention
hook.
b. Repeat step 'a' to release the second lever from its retention hook.
c. Lift up and remove the processor cover.
d. Lift the processor to remove it from the socket and place it in antistatic package.
4. Repeat the above steps to remove the second processor (if available) from the computer.
To verify if your computer has dual processor slots, see the System Board components.
27
To Next Page
Loading...
