Dell Precision T7600 - Installing the Heat Sink; Removing the Heat-Sink Fan

Figure 32.
Installing the Heat Sink
1. Place the heat sink inside the computer.
2. Tighten the captive screws to secure the heat sink to the system board.
3. Connect the heat-sink cable to the system board.
4. Install the left cover.
5. Follow the procedures in After Working Inside Your Computer .
Removing the Heat-Sink Fan
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) left cover
b) heat sink
3. Push the grommets outward to release the heat-sink fan from the assembly.
Figure 33.
4. Remove the heat-sink fan from the heat sink assembly.
25