Figure 34.
Installing the Heat-Sink Fan
1. Slide the heat-sink fan into heat sink assembly.
2. Plug in the grommets to secure the heat-sink fan to the heat sink assembly.
3. Install:
a) heat sink
b) left cover
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the System Fan
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) left cover
b) optical drive
3. Remove the screws that secure the optical-drive bracket.
Figure 35.
4. Push the air duct in the direction indicated to unhinge it from the system fan module.
26
To Next Page
Loading...
