5. Repeat Step 3 and Step 4 to remove the second memory shroud module from the computer.
Installing the Memory Shroud
1. Install the memory shroud module and press downwards until it clicks into place.
2. Install:
a. optical drive
b. computer cover
3. Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. computer cover
b. optical drive
c. memory shroud
3. Press down on the memory-securing clips on each side of the memory module, and lift the memory
module upwards to remove it from the computer.
NOTE: Tilting of DIMM during removal can cause damage to the DIMM.
26
To Next Page
Loading...
