b. PCIe cards
3. Perform the following steps as shown in the illustration:
a. Unthread the cable from the clips [1].
b. Press and slide the latch out to release the PCIe-card retention [2].
c. Remove the PCIe-card retention out of the computer [3].
Installing the PCIe card retention
1. Place the PCIe card retention in its slot and insert the latches.
2. Route the cables through latches.
3. Install:
a. PCIe cards
b. computer cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the System-Fan Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. computer cover
b. optical drive
c. PCIe-card retention
d. memory shroud
3. Unthread the system-board cable from the clips.
29
To Next Page
Loading...
