Need help?Do you have a question about the Dell S140 and is the answer not in the manual?
Provides detailed specifications for the PERC S140 controller regarding hardware and features.
Lists the operating systems compatible with the PERC S140 controller.
Identifies the specific PowerEdge server models that support the PERC S140 controller.
Details the types of physical disks (HDD, SSD, NVMe) supported by the PERC S140 controller.
Describes core physical disk features such as roaming, hot-swapping, power management, and failure detection.
Details fault tolerance features, including disk failure detection, parity, and hot-swap replacement.
Covers virtual disk features like TRIM for SATA SSDs and pass-through SSD operations.
Describes how to increase storage capacity of a virtual disk using Online Capacity Expansion.
Details how the S140 controller connects drives to AHCI devices via backplane ports.
Steps to enter and exit the BIOS Configuration Utility (Ctrl+R) for managing RAID.
Includes initializing, converting, and viewing details of physical disks within the BIOS utility.
Procedures for assigning and unassigning global and dedicated hot spares.
How to view detailed information and status of virtual disks in the BIOS utility.
Steps to access the Unified Extensible Firmware Interface (UEFI) RAID configuration utility.
Allows viewing controller properties and firmware details within the UEFI utility.
Covers converting disks to Non-RAID or RAID capable formats using the UEFI utility.
Tasks for creating and managing virtual disks, including Windows and Linux RAID.
Modify physical disk write cache policy and view virtual disk properties.
Displays detailed properties and policies for virtual disks.
Procedure to permanently delete a virtual disk and its data.
Section for viewing and managing physical disks within the UEFI utility.
Displays detailed properties of physical disks and associated virtual disks.
Procedures for assigning and unassigning global hot spares.
Tasks to perform before installing the operating system and drivers.
Steps to set the SATA controller to RAID mode in System BIOS.
Steps to set NVMe PCIe SSDs to RAID mode in System BIOS.
Resolves issues with configuring Linux RAID using the UEFI Configuration Utility.
Checks causes for the system failing to boot, including controller mode and boot order.
Provides detailed specifications for the PERC S140 controller regarding hardware and features.
Lists the operating systems compatible with the PERC S140 controller.
Identifies the specific PowerEdge server models that support the PERC S140 controller.
Details the types of physical disks (HDD, SSD, NVMe) supported by the PERC S140 controller.
Describes core physical disk features such as roaming, hot-swapping, power management, and failure detection.
Details fault tolerance features, including disk failure detection, parity, and hot-swap replacement.
Covers virtual disk features like TRIM for SATA SSDs and pass-through SSD operations.
Describes how to increase storage capacity of a virtual disk using Online Capacity Expansion.
Details how the S140 controller connects drives to AHCI devices via backplane ports.
Steps to enter and exit the BIOS Configuration Utility (Ctrl+R) for managing RAID.
Includes initializing, converting, and viewing details of physical disks within the BIOS utility.
Procedures for assigning and unassigning global and dedicated hot spares.
How to view detailed information and status of virtual disks in the BIOS utility.
Steps to access the Unified Extensible Firmware Interface (UEFI) RAID configuration utility.
Allows viewing controller properties and firmware details within the UEFI utility.
Covers converting disks to Non-RAID or RAID capable formats using the UEFI utility.
Tasks for creating and managing virtual disks, including Windows and Linux RAID.
Modify physical disk write cache policy and view virtual disk properties.
Displays detailed properties and policies for virtual disks.
Procedure to permanently delete a virtual disk and its data.
Section for viewing and managing physical disks within the UEFI utility.
Displays detailed properties of physical disks and associated virtual disks.
Procedures for assigning and unassigning global hot spares.
Tasks to perform before installing the operating system and drivers.
Steps to set the SATA controller to RAID mode in System BIOS.
Steps to set NVMe PCIe SSDs to RAID mode in System BIOS.
Resolves issues with configuring Linux RAID using the UEFI Configuration Utility.
Checks causes for the system failing to boot, including controller mode and boot order.
General| Brand | Dell |
|---|---|
| Model | S140 |
| Category | Controller |
| Language | English |
To Next Page
