WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the white (digital DVI-D) or the blue (analog VGA) or the DVI-HDMI Dongle and HDMI display connector cable to the
corresponding video port on the back of your computer. Do not use both cables on the same computer. Use both the cables only
when they are connected to two different computers with appropriate video systems.
Connecting the Blue VGA Cable
Connecting the monitor with DVI-HDMI Dongle
To Next Page
Loading...
