Dell S2230MX - Driver Installation for Non-Dell Systems; Setup for Non-Dell Systems or Graphics Cards

Back to Contents Page
Setting Up Your Monitor
Dell™ S2230MX/S2330MX monitor
If you have a non Dell™ desktop, portable computer, or
graphics card
In Windows XP:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com
OR
http://www.NVIDIA.com
).
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 x 1080 again.
In Windows Vista® or Windows 7:
1. Right-click on the desktop and click Personalization.
2. Click Change Display Settings.
3. Click Advanced Settings.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com
OR
http://www.NVIDIA.com
).
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 x 1080 again.
NOTE: If you are unable to set the resolution to 1920 x 1080, please contact the manufacturer of your computer or
consider purchasing a graphics adapter that will support the video resolution of 1920 x 1080.
Back to Contents Page