Dell S2319Nc - Setting Up the Monitor; Connecting the Stand

Setting Up the Monitor | 11
Setting Up the Monitor
Connecting the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: The following steps is applicable for a monitor with a stand.
To attach the monitor stand:
1.
Place the monitor on a soft cloth or cushion.
2.
Fit the stand riser and stand base together, and then turn the screw in the stand
base.
3.
Fit the two tabs on the upper part of the stand to the groove on the back of the
monitor. Press the stand until it snaps into place.