Your Dell Projector 7
About Your Projector
CAUTION: Safety Instructions
1
Do not use the projector near appliances that generate a lot of heat.
2
Do not use the projector in areas where there is an excessive amount of dust. The
dust may cause the system to fail and the projector will automatically shutdown.
3
Ensure that the projector is mounted in a well-ventilated area.
4
Do not block the ventilation slots and openings on the projector.
5
Ensure the projector operates between ambient temperatures (5ºC to 35ºC).
6
Do not try to touch the ventilation outlet as it can become very hot after the
projector has been turned on or immediately after it is turned off.
1 Control panel
2 Focus tab
3 Lens
4 IR receivers
5 Lens cap
6 Mounting holes for ceiling mount: Screw hole M3 x 6.5mm depth.
Recommended torque <8 kgf-cm
7 Mounting hole for tripod: Insert nut 1/4"*20 UNC
8 Lamp cover
9 Tilt adjustment wheel
Top View
1
2
3
4
5
Bottom View
110.00±0.15
55.00±0.10
14.00±0.10
6
9
7
8
110.00±0.15
55.00±0.10
82.15±0.15
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES
To Next Page
Loading...
