Why Dell S3422DW Monitor has no video and power LED is off?
If your Dell monitor displays no video and the power LED is off, ensure the video cable connecting the monitor and the computer is properly connected and secure. Also, verify that the power outlet is functioning correctly by testing it with another electrical device. Make sure the power button is pressed and that the correct input source is selected via the Input Source menu.
What to do if my Dell Monitor has no video but the power LED is on?
If your Dell monitor shows no video but the power LED is on, try the following: increase the brightness and contrast controls using the On-Screen Display (OSD). You can also perform a monitor self-test feature check and check the video cable connector for bent or broken pins. Try running the built-in diagnostics. Finally, ensure that the correct input source is selected via the Input Source menu.
Why is my Dell S3422DW Monitor shaky or jittery?
If your Dell monitor's video is shaky or jittery, try resetting the monitor to its Factory Settings. Also, check for any environmental factors that might be causing interference. If the problem persists, relocate the monitor and test it in another room.
How to fix brightness problems on Dell S3422DW Monitor?
To resolve brightness problems on your Dell monitor, first, reset the monitor to its Factory Settings. If the issue persists, adjust the brightness and contrast controls via the On-Screen Display (OSD).
How to fix Horizontal or Vertical Lines on Dell S3422DW Monitor?
To fix horizontal or vertical lines on your Dell monitor, reset the monitor to its Factory Settings. Then, perform a monitor self-test feature check to determine if these lines are also present in self-test mode. Also, inspect the video cable connector for any bent or broken pins. You can also run the built-in diagnostics.
How to resolve synchronization problems on Dell Monitor?
To resolve synchronization problems on your Dell monitor, reset the monitor to Factory Settings. Perform a monitor self-test to see if the scrambled screen appears in self-test mode. Check the video cable connector for bent or broken pins. As a further step, restart the computer in safe mode.
How to fix missing color on Dell Monitor?
To fix missing color on your Dell monitor, first, perform a monitor self-test feature check. Also, ensure that the video cable connecting the monitor to the computer is securely connected. Check the video cable connector for any bent or broken pins.
How to fix geometric distortion on Dell S3422DW Monitor?
To correct geometric distortion on your Dell monitor, reset the monitor to its Factory Settings. If the distortion persists, adjust the horizontal and vertical controls via the On-Screen Display (OSD).
What to do if Dell S3422DW shows wrong color?
If your Dell monitor displays the wrong color, try different Preset Modes in the Color settings within the OSD. You can also adjust the R/G/B values in Custom Color in the Color settings OSD. Another option is to change the Input Color Format to RGB or YCbCr in the Color settings OSD. Finally, run the built-in diagnostics.
How to fix poor focus on Dell Monitor?
If your Dell monitor has poor focus, eliminate any video extension cables you might be using. If that doesn't help, reset the monitor to its Factory Settings. Also, ensure that the video resolution is set to the correct aspect ratio.
General| Panel type | VA |
|---|---|
| Color gamut | 89.2 % |
| Pixel pitch | 0.23175 x 0.23175 mm |
| Pixel density | 109 ppi |
| Backlight type | LED |
| Display diagonal | 34 \ |
| Anti-glare screen | Yes |
| Display technology | LCD |
| Native aspect ratio | 21:9 |
| Vertical scan range | 48 - 100 Hz |
| Horizontal scan range | 30 - 160 kHz |
| Supported video modes | 480i, 480p, 576p, 720p, 1080i, 1080p |
| Viewable size diagonal | 864.2 mm |
| Viewable size, vertical | 333.7 mm |
| sRGB coverage (typical) | 99.7 % |
| Display number of colors | 16.7 million colors |
| Display diagonal (metric) | 86.42 cm |
| Viewable size, horizontal | 797.2 mm |
| Display brightness (typical) | 300 cd/m² |
| Tilt angle range | -5 - 21 ° |
| Panel mounting interface | 100 x 100 mm |
| HDMI version | 2.2 |
| Headphone out | - |
| USB hub version | 2.0 / 3.2 Gen 1 (3.1 Gen 1) |
| DisplayPort version | 1.2 |
| USB upstream port type | USB Type-B |
| VGA (D-Sub) ports quantity | 0 |
| AC input voltage | 100 - 240 V |
| Power supply type | Internal |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 92 W |
| Power consumption (off) | 0.3 W |
| Power consumption (typical) | 32 W |
| Package depth | 949.96 mm |
| Package width | 468.12 mm |
| Package height | 225.04 mm |
| Package weight | 14950 g |
| Doesn't contain | PVC/BFR |
| Sustainability certificates | RoHS |
| Product color | Silver |
| Front bezel color | Black |
| Heavy metals free | Hg (mercury) |
| Market positioning | Business |
| Operating altitude | 0 - 5000 m |
| Non-operating altitude | 0 - 12192 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| RMS rated power | 10 W |
| Cables included | AC, HDMI, USB |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Bezel width (top) | 8.64 mm |
|---|---|
| Bezel width (side) | 8.65 mm |
| Depth (with stand) | 210 mm |
| Width (with stand) | 808.16 mm |
| Height (with stand) | 489.36 mm |
| Weight (with stand) | 9800 g |
| Bezel width (bottom) | 22.14 mm |
| Depth (without stand) | 64.01 mm |
| Height (without stand) | 364.5 mm |
| Weight (without stand) | 6700 g |
To Next Page
