Using Your Projector 49
a
Go to
Menu Settings
, press and then select
Password
to enable
the password settings.
b
Enabling the Password function will pop up a change screen. Key in
a 4-digit number from the screen and press .
c
To confirm, enter the password again.
d
If the password verification is successful, you may resume with
accessing the projector's functions and its utilities.
2
If you have entered an incorrect password, you will be given two more
chances. After three invalid attempts, the projector will automatically
turn off.
NOTE: If you forget your password, contact DELL or a
qualified service person.
3
To disable the password function, select the
Disabled
option to close
the function.
4
To delete the password, select the
Delete
option.
Downloaded From projector-manual.com DELL Manuals
To Next Page
Loading...
