Using Your Projector 97
Firmware Upgrade
Use the Firmware Upgrade page to update your projector’s wireless firmware.
NOTE: Please disable and enable wireless/network using the OSD to
restart the network card for the projector after firmware upgrade is
successful.
To start firmware update, follow these steps:
1 You can download the firmware files from
dell.com/support
.
2 Press
Browse
to select the file to update.
3 Click the
Update
button to start. Wait while the system updates the
firmware in your device.
CAUTION: Do not interrupt the update process as this may cause
the system to crash!
4 Click
OK
when the update is complete.
Downloaded From projector-manual.com DELL Manuals
To Next Page
Loading...
