Back-Panel Connectors (per Storage Controller Module)
Fibre Channel connectors Connection to the Fiber Channel Network
iSCSI connectors Connection to iSCSI devices
NOTE: Used for replication to another
Storage Center only
SAS connectors 6 Gbps SAS A and B connectors for
expansion to additional enclosures
NOTE: SAS connectors are
SFF-8086/SFF-8088 compliant
One USB 3.0 connector
NOTE: For engineering use only
8 Getting Started With Your System
USB Connector
LED Indicators
Front panel
•
One two color LED indicator for system
status
•
One single color LED indicator for power
status
•
Two digit, seven-segment display
indicating enclosure ID number
•
ID button with a single color LED
indicating startup and pressed states
Hard-drive carrier
•
One single-color activity LED
•
One single-color LED status indicator
per drive
Storage Controller Module
•
Two single-color LEDs per Ethernet Port
indicating activity and link speed
•
Four dual-color LEDs per SAS Connector
indicating port activity and status
•
One single-color LED indicating status
•
One single-color LED indicating fault
•
One single-color LED for identification
•
Eight single-color LED for diagnostics
To Next Page
Loading...
