Figure 6. Connect the Power Cables
3. Fasten the velcro strap to the power supply handle to prevent accidental
pulling of the power cable.
4. Plug the other end of the power cables into a grounded electrical outlet
or a separate power source such as an uninterrupted power supply (UPS)
or a power distribution unit (PDU).
NOM Information (Mexico Only)
The following information is provided on the device described in this
document in compliance with the requirements of the official Mexican
standards (NOM):
Importer:
Dell Inc. de México, S.A. de C.V
Paseo de la Reforma 2620-11 ° Piso
Col. Lomas Atlas
11950 México, D.F.
Model number: E03T
Supply voltage: 200–240 VAC
Frequency: 50/60 Hz
Current consumption: 8.8 A
10
To Next Page
Loading...
