Dell SC9000 - SC9000 Hardware Components; Storage System Overview

Installing the SC9000 Storage System in a Rack
Install the storage system and other Storage Center components in a rack.
NOTE: Mount the storage system in a manner that allows for expansion in the rack and prevents the
rack from becoming top‐heavy.
Figure 2. Install the Storage System in a Rack
Installing the Front Bezel
Install the bezel on the front of the storage system.
1. Hook the right end of the bezel onto the storage system.
Figure 3. Front Bezel
2. Insert the left end of the bezel into the securing slot until the release latch snaps into place.
3. Secure the bezel with the keylock.
Connecting the Power Cables
Connect the power cables to the storage system.
1. Before connecting the power cables, make sure that the power switches on the storage system are
in the OFF position.
2. Connect the power cables to the power supplies in the storage system chassis.
5