Dell SE2719HR User Manual

|
19
Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
NOTE: Do not connect all cables to the computer at the same time. It
is recommended to route the cables through the cable-management
slot before you connect them to the monitor.
To connect your monitor to the computer:
1.
2. Connect VGA or HDMI cable from your monitor to the computer.
Connecting HDMI cable
Connecting VGA cable
Turn o your computer and disconnect the power cable.

Dell SE2719HR Specifications

General

Color	black
Screen Type	led
Tiltable	yes
OS Compatibility	windows
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1000:1
Pixel Pitch	81 pixels per inch
VGA Ports	1
Power Saving Mode	0.5 watts
Power Consumption	23 watts
Depth with Stand	7.4 inches
Width with Stand	24.1 inches
Depth without Stand	1.8 inches
Height without Stand	14.3 inches
Net Weight without Stand	10.7 pounds