Dell ST2010B - OSD Menu Navigation

1.Press tolaunchtheOSDmenuanddisplaythemainmenu.
Main Menu for Analog (VGA) Input

or
Main Menu for HDMI Input

2.Pressthe or button to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
followingtableforacompletelistofalltheoptionsavailableforthemonitor.
3.Pressthe buttononcetoactivatethehighlightedoption.
4.Press and button to select the desired parameter.
5. Press the button to enter the slide bar and then use the  or button, according to the indicators on the menu, to make your changes.
6.Select the option to return to the main menu or the OSD menu.

`

NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector.
Icon
Menu and
Description