Use this menu to activate Brightness/Contrast adjustment.
Brightness adjusts the luminance of the backlight.
Press the button to increase brightness and press the button to decrease brightness (min 0 ~ max 100).
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Press the button to increase contrast and press the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Press togobacktothemainmenu.
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for
use with your particular setup.
NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration.Thisoptionisonlyavailablewhenyouare
using the analog (VGA)
Input Source
The Input Source menu is to select between different video signals that may be connected to your monitor.
Scan for Sources. Press to scan for available input signals.
Select VGA input when you are using the analog (VGA) connector. Press to select the VGA input source.
To Next Page
Loading...
